ADIC Scalar 1000, SNC 5100 manual Heartbeat Event Descriptions

SNC 5100

Table 7: Event Codes and Actions

Event	Viewing	Default		Action2
		Trap	Description
Code	Level1
		Threshold
102	1		Temperature change detected since	4, 0
			the last report (event message
			indicates the change to High, Very
			High, Reduced to High, or OK)
106	1	1	Fibre Channel interface failed Health	2
			Check
107	1	1	SCSI interface failed Health Check	1
109	1	1	Target device failed Health Check	1
110	1	1	Fibre Channel link status changed	0, 2
111	1	1	Fibre Channel transfer failures	0
			detected since the last report
			Caution: error recovery may have
			succeeded
112	1	1	Blower/Fan is running in Warning or	4
			Alarm Range
113	1	1	Power is running in Warning or	5
			Alarm Range
114	1	1	Temperature is running in Warning or	4
			Alarm Range
115	1	1	Network is running at 10 Mb/sec	7
			Heartbeat Event Descriptions
			Caution: These event codes are not
			logged in the Event Log. Notification
			of these events occurs from the ADIC
			Management Console. For more
			information on Heartbeat, see the
			ADIC Management Console User
			Guide.
2005	N.A.	N.A.	The Server could not verify the	7,3
			connection to the SNC 5100
2016	N.A.	N.A.	The Client could not communicate	7,9
			with the Server
2026,7	N.A.	N.A.	The Server could not communicate	7,9
			with the Client

40 Event Codes and Actions

6-00020-02