ADIC Scalar 1000, SNC 5100 Uptime, UserAdd username,password, UserDelete username,password

SNC 5100

value = 15 = 0xf SN60023C >

uptime

The uptime command displays the elapsed time since the last boot of the SNC 5100.

SN60023 > uptime

Elapsed time since reset 4d:23h:12m:46s:10t value = 10 = 0xa

SN60023 >

The example indicates that 4 days, 23 hours, 12 minutes, 46 seconds and 10 clock ticks have elapsed since the SNC 5100 was last booted. There are 60 ticks per second.

user

The userAdd,userDelete, and userList commands provide control of the user list. The persistent address map file can be sent to the SNC 5100 or retrieved from it using FTP. If you need to use FTP, use the user commands to create a login and password so you can access the SNC 5100 from the Ethernet network.

userAdd “username”,”password”

The userAdd command adds a user and password to the password file. The parameter “username” must be from 3 to 80 characters. The parameter “password” must be from 8 to 40 characters.

SN60023 > userAdd "nancy","password" value = 0 = 0x0

SN60023 >

userDelete “username”,”password”

The userDelete command deletes a user from the password file. It is not possible to remove a user without knowing the user’s password. If the user’s password is forgotten or unknown, you have to delete the password file, reboot the SNC 5100, and then add all user names and passwords again.

SN60023 > userDelete "nancy","password"

184 Commands

6-00020-02