ADIC Scalar 1000, SNC 5100 manual SfmShow hostIndex, Hostindex Meaning

SNC 5100

string” for the specified host connection index. The following command example shows setting the host name for host Id 1 to “LANDERS”. Existing hostindex and name values can be determined by looking at the “Id” and “Host Name” columns in the output of the sfmShow -1command.

SN60023 > sfmNameSet 1,"LANDERS" value = 0 = 0x0

SN60023 >

sfmShow [hostIndex]

The sfmShow command displays information about hosts that have been registered with Scalar Firewall Manager based on the value of hostIndex.

Hostindex	Meaning
-1	Displays brief list of all known host connections
0	Full display of all known host connections, and if online displays a list of all
	LUNs available to that connection
N (1-48)	Display the full information for the host N only

The following command example shows SFM information for the hosts that have been registered by SFM. Hosts that have the Host Registration Service running with periodic re-registration are shown with a status of Periodic. One of the hosts has more than one Fibre Channel connection to the Pathlight 5000SNC 5100.

SN60023 > sfmShow -1 SFM State: Active

Id World Wide Name St. Typ HexFlags Status Host Name Host Type Host Connection

-------------------- --- --- -------- --------- ---------- --

001 200000e0.8b0057d8 000 001 00000000 Online LANDERS NT 4.0 SP5 ScsiPort6 [0:0:0](QLA2200)

002 200000e0.8b16014d 000 001 00000000 Periodic SUPERIOR NT 4.0 SP5 ScsiPort7 [0:0:0](QLA2200)

003 200000e0.8b160152 000 001 00000000 Offline SUPERIOR NT 4.0 SP5 ScsiPort7 [0:0:0](QLA2200)

value = 0 = 0x0 SN60023 >

168 Commands

6-00020-02