Tektronix 360 user manual Checking the printer’s language mode

Troubleshooting 8

Checking the printer’s language mode

If your Þle doesnÕt print, the language on the printerÕs port you are using may have been changed.

1.Print a copy of the printerÕs ConÞguration Page to see the language mode on each port. Refer to ÒPrinting a ConÞguration PageÓ on page 2-25.

2.If the printer port you are using has the wrong language set for the type of application you are using, send one of the following utility Þles to the printer:

■To print PostScript Þles, use the PSCRIPT.PS Þle to set up a port to receive PostScript. Refer to the on-line manual on the printerÕs CD-ROM for details.

■To print PostScript, HP-GL, or Monochrome PCL5 Þles interchangeably, use the AIS.PS Þle to set up a port for automatic language selection. Refer to the on-line manual on the printerÕs CD-ROM for details.

User Manual 8-25