Tektronix 360 user manual CleanLight Stripes Clean Test

Caring For Your Printer 7

2.When the printer is on and the Ready message or the printerÕs name appears in the front panel, press the Clean button. The printer displays the Þrst selection in the menu:

Clean:Light Stripes

<---- Clean Test

3.Press the left arrow (<---)button until the following front panel message appears:

Clean:Ink Smears

<---- Clean Test

4.Press the Clean button. The printer displays the following message:

Warming Up

Cancel

5.After a short delay during the warm-up period, the printer begins an automatic sequence of feeding 10 clean sheets of paper from the media tray selected as the cleaning page source. A front panel message indicates the number of sheets remaining to be fed. For example:

Cleaning:Using 10 Sheets

6.When the cleaning sequence is complete, inspect the last sheet of paper fed through the printer. If it is not clean, repeat the cleaning sequence by pressing the Clean button once again.

7.Return the printer to normal operation by pressing the Exit button.

If the ink smear problem persists: Refer to the following two procedures for directions on cleaning paper-feed rollers and the paper-exit path.

User Manual 7-21