Tektronix 360 user manual Cleaning for upper media tray jams media-pick roller

7Caring For Your Printer

Cleaning for upper media tray jams: media-pick roller

Approximate time to complete: 5 minutes

Clean the media-pick roller if the printer incorrectly feeds paper or transparencies or if it feeds more than one sheet at a time.

You will need the pick-roller cleaning tray included in the cleaning kit and isopropyl alcohol. Refer to ÒUsing isopropyl alcoholÓ on page 7-19 for more information on proper cleaning procedures.

The printerÕs front panel messages will guide you through the necessary steps to perform this automatic cleaning procedure. You can also manually clean the media-pick roller; refer to page 7-39.

Note Media-picking problems can also occur when the maintenance tray is not properly latched. Try removing and relatching the maintenance tray to cure a media-picking problem. Refer to “Replacing the maintenance tray” on page 7-11 for instructions.

Automatically cleaning the media-pick roller

1.When the printer is on and the Ready message or the printerÕs name appears in the front panel, press the Clean button. The printer displays the Þrst selection in the menu:

Clean:Light Stripes

<---- Clean Test

2.Press the left arrow(<----)button until the following front panel message appears:

Clean:Media Tray Jams

<---- Clean Test

3.Press the Clean button once again.

7-34Phaser 360 Color Printer