Tektronix 360 user manual Msds for ColorStix ink sticks

11Regulatory Information and Specifications

MSDS for ColorStix ink sticks

Section 1 – Product identification

Trade name and Tektronix part number:
ColorStix® Solid Ink — Black	016-1307-00
ColorStix® Solid Ink — Cyan	016-1308-01
ColorStix® Solid Ink — Magenta	016-1309-01
ColorStix® Solid Ink — Yellow	016-1310-01

Product use: For use in Tektonix Phaser® 340/350/360 color printers.

Section 2 – Information on ingredients

Ingredients:

Fatty amide waxes; rosin ester; phthalate ester; black, cyan, magenta, or yellow dye

The specific identity of ingredients, and their percentage composition, are withheld as a trade secret.

Section 3 – Hazards identification

Potential Health Effects:

Eyes: Contact unlikely. If any particles get into the eye, flush thoroughly with water.

Skin: Not an irritant, based on test results.

Inhalation: Not an expected route of exposure.

Ingestion: Not an expected route of exposure. See section 11.

Section 4 – First aid measures

None indicated. This product is a waxy solid and should not cause health hazards when used as intended.

Section 5 – Fire fighting measures

Flammable Properties:

Flash point: Above 200° C.

Fire & explosion hazards: These inks will burn. No unusual hazards are expected.

Section 6 – Accidental release measures

Spill or Leak: Not applicable.

Section 7 – Handling and storage

Handling: None.

Storage: Avoid high temperatures.

Section 8 – Exposure control – personal protection

No special protection indicated when used as intended.

TLV/PEL: None established.

Section 9 – Physical and chemical properties

Appearance: Waxy solid. Black, blue, red, or yellow in color.

Odor: None.

Solubility: Not water soluble.

11-4Phaser 360 Color Printer