Tektronix 360 user manual Installing printer software for Windows, Tektronix Printer Driver

Installing Printer Software 3

Installing printer software for Windows 3.1

Note If you are installing from diskettes, you may need more than one diskette depending on your Windows system. Keep all of the printer’s diskettes handy during the installation, and insert each diskette when you are prompted by the installation program. The Tektronix driver is available on both CD-ROM and diskette; the AdobePS 3 driver is available on CD-ROM only.

1.Insert either the printerÕs CD-ROM or the Phaser 360 Color Printer Installer for Windows Disk 1 into the appropriate drive on your computer.

2.From the File menu, select Run.

3.Type in the drive for the CD-ROM or diskette, type SETUP and click OK.

4.In the Installer, click Next until the Select Installation Type dialog box appears.

5.Select either Easy Installation or Custom Installation, and click Next. When you Þnish with the Easy or Custom instructions, continue with Step 6 on page 3-15.

Easy Installation

a.The following files are copied to your computer’s hard disk:

■Tektronix Printer Driver

■QuarkXPress PDF

Installs an application-specific printer description file, if the application is found.

■PhaserPrint Plug-in for Photoshop Installs an application-specificplug-in.

■Samplers

Installs color sampler charts and a fonts sampler.

b.In the Choose Destination Directory dialog box, select the location for installing the PhaserPrint plug-in.

c.Click Next.

Files are copied to your computer’s hard disk.

User Manual 3-13