Tektronix 360 user manual fluid if tipped. Never ship a partially used maintenance tray

7Caring For Your Printer

Caution Some surfaces inside the printer may be hot. Be careful not to touch the areas marked with this caution icon:

2.When you open the front cover, the following message appears:

Caution Hot Surfaces

Install New Tray (B)

3.Grasp the maintenance tray by the front edge (marked with a blue ÒBÓ label) and lift up while sliding it out of the printer. Place the maintenance tray on a level surface.

9101-53

Note Once the maintenance tray has been partially used, it leaks drum

fluid if tipped. Never ship a partially used maintenance tray.

Never move or ship a printer with a maintenance tray installed. Contact with the drum fluid poses no known health risk. Refer to “MSDS for silicone oil (drum fluid)” on page 11-6 for more information.

7-12Phaser 360 Color Printer