Tektronix 360 user manual Unlocking the transit restraint

Getting Set Up 2

Unlocking the transit restraint

1.Insert a wide ßat-blade screwdriver into the slot of the transit restraint lock, located on the right side of the printer.

2.While pushing inward with slight pressure, turn the lock button counterclockwise until it springs out ßush with the side of the printer.

2

1

9922-03

Caution If you move or ship the printer, be sure to lock the transit restraint to protect the printhead from damage. Always turn the printer power off using the On/Off switch before locking or unlocking the transit restraint. Refer to “Moving or shipping your printer” on page 7-2 for more information.

User Manual 2-7