Tektronix 360 Cleaning for ink smears paper-exit path, Approximate time to complete 10 minutes

7Caring For Your Printer

Cleaning for ink smears: paper-exit path

Approximate time to complete: 10 minutes

If you have already performed the other ÒCleaning for ink smearsÓ procedures described earlier in this chapter but problems persist, you should manually clean the paper-exit path. Refer also to ÒCleaning for jams and ink smears: paper-feed rollersÓ on page 7-22.

Occasionally, stray ink particles and drum ßuid become attached to the exit Þngers, rollers, and guides under the exit cover causing ink streaks or marks on the top edge, front, or back of prints. When this occurs, you must clean these parts using both dry and alcohol-soaked swabs. Refer to ÒUsing isopropyl alcoholÓ on page 7-19 for more information.

Sample ink smear: paper-exit path

9922-31

7-28Phaser 360 Color Printer