Tektronix 360 user manual 9101-39

7Caring For Your Printer

4.Lift one corner of the waste liner handle to release it from the maintenance tray; remove the waste liner.

5.Empty the contents of the waste liner by twisting it. Make sure that you empty the waste liner completely before replacing it in the maintenance tray. Used ink is nontoxic; it can be treated as normal ofÞce waste.

6.Place the waste liner back in the maintenance tray.

a.Place the side opposite the handle into the maintenance tray first.

b.Press down Þrmly in the center of the waste liner to snap it into place. Make sure that the waste liner is fully seated in the maintenance tray.

4 5 6

b a

9101-39

7.Reinsert the maintenance tray into the printer.

Note To prevent media jams at the media tray, be sure to push the maintenance tray into the printer until both sides latch in place.

8.Close the front cover.

7-10Phaser 360 Color Printer