Tektronix 360 user manual Front panel messages contd

	Troubleshooting 8
Front panel messages (cont'd.)
Message	Action
Jam:Open Front	Open the front cover and remove the paper jam from
Cover	the manual-feed slot or behind the front cover. You may
	need to push on both sides of the maintenance tray to
	relatch it or clean the upper or lower paper-feed rollers.
Jam:Remove Lower	There is a paper jam at the lower paper tray. Remove
Tray	the tray and the jammed paper.
Jam:Remove Upper	There is a paper jam at the standard media tray.
Tray	Remove the tray and the jammed paper. You may need
	to run the Clean:Paper Jams routine if this problem
	persists.
Jam:Retry Manual	Remove the media from the manual-feed slot and
Feed	reinsert it.
Lower Media Tray	Add paper to the lower paper tray.
Empty
Maintenance Tray	The maintenance tray is nearly empty of drum fluid.
(B) Low	Open the front cover, remove the maintenance tray,
	and replace it with a new one.
Manual Feed Paper	The printer requires a sheet of paper for self-cleaning,
	but the media tray contains transparencies. Feed a
	sheet of paper into the manual feed slot.
Media Tray Empty	Add paper or transparencies to the media tray.
Out of Ink	One or more ink bins is empty. Load the appropriate
	ink stick(s).
Replace Lower	Insert the lower paper tray.
Media Tray
Replace Media Tray	Insert the standard media tray.
Replace Upper	Insert the standard media tray.
Media Tray
Tray (B) Locked	The printer has locked the maintenance tray because
	hot ink is present. Close the front cover and wait for a
	few minutes before trying to remove the maintenance
	tray.
Unlock Transit	Unlock the transit restraint on the right side of the
Restraint	printer before sending print jobs.

User Manual 8-3