Tektronix 360 user manual Moving or shipping your printer

7Caring For Your Printer

Moving or shipping your printer

Carefully follow the procedures listed below to avoid damaging your printer when you need to move or ship it.

1.Latch all covers: Make sure that all doors and covers are Þrmly latched to ensure that the printhead is parked. Do not turn off the printer until the doors are closed to avoid damage to the printhead.

2.Turn off the printer: Wait for the printerÕs front panel to display the Ready message or the printerÕs name, then turn off the printer using the rear-panel On/Off switch.

3.Unplug the printer: To prevent damage to the printhead and the power supply, never turn off the printer by unplugging it.

4.Wait for 30 minutes: Let the printer cool down for at least 30 minutes before you proceed.

Caution The printer must be allowed to cool down for at least 30 minutes before you move it so that the ink has time to

solidify. Failure to wait 30 minutes will likely result in an ink spill that will damage the printer’s internal components.

7-2 Phaser 360 Color Printer