Getting started
English
Français
Manufacturer’s code list
No. | Manufacturer |
|
|
01 | AMSTRAD |
|
|
02 | AMSTRAD |
03 | AMSTRAD |
|
|
04 | RFT/ANKARO/QUADRAL/ |
| SKYMASTER |
|
|
05 | RFT |
06 | KATHREIN |
|
|
07 | KATHREIN |
|
|
08 | KATHREIN/MASPRO |
09 | KATHREIN/PHILIPS |
|
|
10 | NOKIA |
|
|
11 | NOKIA/GRUNDIG |
12 | GRUNDIG/SIEMENS |
|
|
13 | PAGE |
|
|
14 | TECHNISAT |
15 | WISI |
|
|
16 | WISI/RADIX |
|
|
17 | FUBA/SEG |
18 | FTE |
To use the remote control unit for satellite tuner operation
You can operate the satellite tuner with the remote control unit. To operate it, you have to change the remote control signal. Also refer to the manual supplied with it.
Changing the remote control signal
1 Set DVD | TV | SAT. on the remote control unit to SAT. |
|
SATELLITE
2Press and hold 
, then press SET . SATELLITE/
| Do not release | SATELLITE | . Keep holding | / | until the next step is completed. | ||||||
| / |
|
| ||||||||
|
|
| |||||||||
|
|
| |||||||||
3 |
| SATELLITE |
|
|
|
|
| ||||
Holding | / |
|
|
| , enter the manufacturer’s code (two digits) using 0 to 9 . | ||||||
| |||||||||||
| See the lists on the right to find the manufacturer’s code. | ||||||||||
4 |
| SATELLITE |
|
|
|
|
| ||||
Release | / |
| . |
|
|
|
|
| |||
|
|
|
|
|
| ||||||
The following buttons can be used for operating the satellite tuner (with
TV
DVD 
SAT. set to SAT.):
| SATELLITE | Turns the satellite tuner on or off. | ||||
| / |
|
|
|
|
|
|
|
|
|
|
|
|
| + |
| Changes the channels. |
|
|
|
| CH |
|
|
| ||
| – |
|
|
|
| |
|
|
|
|
|
| |
| 0 to 9 | Selects the channels. |
|
|
| |
|
|
|
|
| ||
5 Try to operate the satellite tuner by pressing | SATELLITE | |||||
/ |
| . | ||||
| ||||||
If the satellite tuner turns on or off, you have entered the correct code.
Getting started
NOTE
¦If there is more than one code listed for your brand of the satellite tuner, try each one until the correct one is entered.
19
