![](/images/new-backgrounds/1127134/127134131x1.webp)
Additional information
Troubleshooting
English
Français
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
Symptom | Possible case | Remedy |
Power does not come on. | Power plug is not inserted securely. | Plug in securely. |
|
|
|
Remote control does not work. | Too far from the unit | More closer to the unit. |
|
|
|
| The tip of the remote unit is not | Point the infrared light- emitting window |
| pointed in the right direction. | toward the remote sensor on the front panel. |
|
|
|
| Batteries are exhausted. | Replace the batteries with new ones. |
|
|
|
| Battery polarity is incorrect. | Take out the batteries and insert them again |
|
| in the correct direction. |
|
|
|
No picture is displayed on the | Connection of video cable is | Connect the cable correctly. |
monitor. | incorrect. |
|
|
|
|
| Input selection of TV is incorrect. | Select correctly. |
|
|
|
| Disc is not playable. | Use a playable disc. (See page 11.) |
|
|
|
Picture is noisy. | The unit is connected to a VCR | Connect the unit so that the picture signal |
| directly and the copyguard function | flows directly to the TV. |
| is activated. |
|
|
|
|
No audio is reproduced. | Connection to stereo system is | Check the connections. |
| incorrect. |
|
|
|
|
| Input selection of amplifier is | Select correctly. |
| incorrect. |
|
|
|
|
| The unit is connected only using | Connect the unit using AUDIO OUT jack also. |
| DIGITAL OUT jack. |
|
|
|
|
No sound from headphones. | PHONES LEVEL is too low. | Adjust the PHONES LEVEL. |
|
|
|
Sound is distorted or noise is | Disc is dirty. | Wipe the disc surface. |
generated. |
|
|
|
|
|
Picture is garbled. | The screen saver mode is set to | Set the screen saver mode to the other mode. |
| MODE 1, and the screen saver |
|
| function is activated. |
|
|
|
|
Picture does not fit the television | MONITOR TYPE is not correctly set. | Select monitor type correctly. (See page 53). |
screen. | Television is not correctly set. | Set the television correctly. |
| ||
|
|
|
Operation is not possible | Microcomputer malfunctions due to | Turn off the power and unplug the power |
| lightning or static electricity. | cord, then connect the power cord again. |
|
|
|
| Moisture condensation occurs by a | Turn off the power, then turn it on a few |
| sudden change of temperature or | hours later. |
| humidity. |
|
|
|
|
Additional | information |
|
|
65