Tektronix user manual Setting up the Phaser 360 printer driver

3Installing Printer Software

Setting up the Phaser 360 printer driver

The Phaser 360 printer driver is a Tektronix-modiÞed version of Apple's LaserWriter 7.1.2 printer driver. Use the Phaser 360 printer driver if you are using System Software 6.0.7, or 7.0 and later.

1.Install the printerÕs software as described on page 3-17. Choose Easy Install to install all of the necessary software, or select

Phaser 360 Driver in the Custom Install window.

2.Select Chooser from the Apple menu.

3.Click on the Phaser 360 printer driver icon on the left side of the Chooser. A list appears with the printers you have connected to your Macintosh or printers that are available on a network. (If the printer driver icon does not appear, check the cable connections on your computer and printer.)

4.Click on the Zone your printer is in. See your network administrator if you have questions.

5.Click on your Phaser 360 printer in the list of printers on the right side of the Chooser.

Close the Chooser by clicking its close box.

3-18Phaser 360 Color Printer