Tektronix 360 user manual Windows 3.1 users

Printing: Beyond the Basics 5

Windows 3.1 users

Note Use the following procedure only if your computer is connected to the printer through the parallel port. Do not do this procedure if the printer is connected over a network port.

1.From the Control Panel, double-click Printers.

2.In the Printers dialog box, select the Tektronix Phaser 360 printer, then click Setup. A dialog box appears with the printerÕs name across the top.

3.Click the PostScript tab.

4.In the Performance Options Þeld, select the Use PostScript Level 2 Features option.

5.Click the Job Control tab.

6.For better performance, select the Binary Mode option.

7.From your application, choose the Tektronix Phaser 360 as your printer.

8.Try printing the document again.

User Manual 5-17