System Cleaning
Use the following procedure for cleaning the system.
1.Power off the system and unplug all power cables.
2.Periodically wipe the outside of the system, keyboard, mouse, and monitor with a soft, clean cloth. Remove stains with a mild detergent. Do not use solvents or strong, abrasive cleaners on any part of the system.
3.Clean the monitor screen with a commercial monitor screen cleaning kit. Or use a glass cleaner, then wipe with a clean
4.Local distributors and dealers may sell diskette drive head cleaning kits. These kits contain special diskettes and cleaning solution. Do not use the abrasive head cleaning kits (kits without cleaning solution).
Insert the diskette immediately after powering on the system, before the disk bootup. Allow the diskette drive heads to clean for about 30 seconds.
Keyboard Cleaning
As necessary, inspect and clean the inside of the keyboard as follows.
1.Remove the eight screws holding the keyboard enclosure together.
Note: The keyboard and cable together are considered a
2.Separate the two halves of the enclosure. Clean the enclosure and keys with a damp cloth. A small,
Mouse Cleaning
Under normal conditions, the mouse has a
1.Unplug the mouse from the system.
2.Turn the mouse upside down and locate the mouse ball cover (see the following figure).
3.Turn the ball cover clockwise and remove the cover.
