NEC SP B-Series manual Securing the Drive, Inserting the Device

Securing the Drive

Slide the bracket into the molded plastic drive slot. Secure the bracket to the front panel with the two screws shown in “Removing the Bracket

TScrews.”

If you are installing the device in the standard 3 1/2-inch internal device slot, simply insert the drive into the opening until it is secured (see the following figure). Secure the drive with two screws inserted into the front of the system.

Inserting the Device

TIf you are installing a device in an accessible slot, go to step 6. Otherwise, continue to step 7.

Option Installation 3-21