Exit Menu

The Exit Menu allows you to choose how to exit the Setup program. Press the arrow (cursor) keys to select the desired option, then press Enter to make your choice (or use the arrow key to select another one).

Exit Saving Changes

This option exits the Setup program and saves your changes to the BIOS.

Exit Discarding Changes

This option exits the Setup program without saving your changes to the BIOS.

Load Setup Defaults

This option loads the Setup program’s default values.

Load Custom Defaults

This option loads Custom default settings.

Save Custom Defaults

TThis option saves your changes to Custom default settings.

Discard Changes

This option loads previous values from CMOS RAM for all BIOS settings.

Note: If your system’s CMOS fails, the BIOS will load custom default settings (if you’ve saved them) or factory default settings.

Finally, press Enter again to confirm and exit the Setup program.

Intel Processor Serial Number Control Utility

The Intel Processor Serial Number Control utility is a Windows program that enables or disables the reading of the Pentium III processor serial number by software. This function lets you control which software programs or websites have permission to read the processor serial number. When installed, the utility runs automatically each time the system powers on.

Note: The Intel Processor Serial Number Control Utility is for use with systems shipping with the Intel Pentium III processor. Installing this utility on a system which does not contain a Pentium III processor generates an error message.

Utilities 2-15

Page 37
Image 37
NEC SP B-Series manual Intel Processor Serial Number Control Utility, Exit Menu