NEC SP B-Series manual Storage Device Installation, Removing the Front Panel

Connecting an Accessible 5 1/4-Inch Device

A – Device Connector	B – Red Edge
C – Signal Cable	D – Power Cable

Storage Device Installation

The following subsections describe how to install 3 1/2-inch and 5 1/4-inch devices. The installation procedures include:

removing the front panel

removing the CD-ROM/DVD drive

installing a 3 1/2-inch device

Tinstalling a 5 1/4-inch device replacing the front panel.

Removing the Front Panel

Use the following procedure to remove the front panel.

1.Locate the two plastic tabs at the front of the chassis. They are indicated by two arrows engraved on the chassis.

2.Press down on the two tabs and press in a third tab at the end of the panel to release the panel (see the following figure).

Option Installation 3-17