DIMM Installation

Use the following procedure to install a DIMM.

1.Remove the access cover.

2.Locate the DIMM sockets.

3.Remove any currently-installed DIMMs that are not needed. See the previous section “DIMM Removal.”

!CAUTION

Before installing a DIMM, reduce static discharge by touching the system’s metal chassis.

4.To install a DIMM, align the module with an empty socket. Make sure that the notches on the DIMM line up with the keys in the sockets.

5.Insert the DIMM into the socket. Close the plastic clips at both ends of the socket.

Installing a DIMM

A – Plastic Clip

6.Replace any cables or boards that may have been removed.

7.Replace the access cover.

Data Storage Devices

The system board in your computer supports the following storage devices:

Tstandard 1.44-MB diskette drive and an optional tape backup unit up to four IDE drives.

Option Installation 3-11

Page 51
Image 51
NEC SP B-Series manual Data Storage Devices, Dimm Installation, Installing a Dimm