Utilities 2-11
DMI Event Logging Submenu
This submenu can be used to view and modify DMI Event Logs. To enter the
submenu, highlight the DMI Event Logging field, then press Enter. The
following options appear:
Event Log Ca p acity/Event Log Validit y
These fields indicate whether space is available in the Event Log and
whether the contents of the log are valid.
View DMI Event Log
If there are no event logs stored, you cannot access this log.
Clear All DMI Event Logs
This option clears the DMI Event Log after rebooting the system. Choose
“No” (default) or “Yes.”
Event Logging
This option e nables logg ing of DMI event s. Choose “D is a bled” or
“Enabled” (default).
ECC Event Logging
This option e nables logg ing of ECC event s. Choose “D is a bled” or
“Enabled” (default).
Mark DMI Events as Read
This option is used to mark off all DMI Events as read. If necessary,
press Enter to access the Confirmation dialog box and confirm your
preference.
To return t o the Advance d Menu, pre s s Esc.
Video Configuration Submenu
This submenu can be used to configure specific video features. To enter the
submenu, highlight the field, then press Enter. The following options appear:
Palette Snooping
This option controls the ability of a primary PCI graphics controller to
share a common palette with an ISA add-in video board. Select
“Enabled” or “Disabled” (default).
AGP Apertu r e
This option specifies the aperture size for the AGP video controller. The
choices are “64 MB” and “256 MB.” The default size is “64 MB” for the
AGP video controller.
Default Primary Video Adapter
This option specifies the type of video board used for the boot display
device.
To return t o the Advance d Menu, pre s s Esc.