70MANAGING THE VCN ACCESS CONCENTRATOR

The LC Configuration Menu

To view the LC Configuration Menu, type 7 and press <Enter> in the Line

Card Main Menu; the screen in Figure 45 appears. The VLAN ID and the

Ethernet duplex mode are displayed followed by the menu options.

Figure 45 LC Configuration Menu

LC Configuration Menu

----------------------

Current

VLAN ID for Management:

None

 

Current

Ethernet mode:

Full

Duplex

1.Set VLAN ID for Management

2.Set Ethernet Half/Full Duplex Mode

3.Change Password

4.Set to Factory Defaults

0.Return to Previous Menu

Please enter your choice:

After changing the parameters controlled by this menu, perform a card reset to ensure that the card operates with your selected values.

Set VLAN ID for Management

The default VCN AC VLAN for management is VLAN 1 tagged.

To set the management VLAN ID:

1In the Line Card Main Menu, type 7 and press <Enter>.

2In the LC Configuration Menu, type 1 and press <Enter>. The dialog in step Figure 46appears.

Figure 46 LC VLAN ID Dialog

Note: In a topology with VCN Concentrator, the concentrator's

agent setting may override existing setting. For more information please refer to the service manual.

Enter VLAN ID (1 - 4094, 0 for none) [none]:

The system expects a number in the indicated range. Type a number in the range 0-4094 and press <Enter>.

Page 70
Image 70
3Com DSA-3CV1100-02 service manual LC Configuration Menu, Set Vlan ID for Management