62 MANAGING THE VCN ACCESS CONCENTRATOR
The action has been canceled
Setting Normal Mode
To set normal mode, type 1 and press <Enter>. The message appears:
This action will change the working mode of Ethernet
Do you want to proceed (Y/[N])? :
To c on fi rm ty pe y; to discard, type n; and and press <Enter>.
When you proceed, the message appears:
Action has been done.
When you discard the operation, the message appears:
The action has been canceled
Normal mode is both lack of loopbacks and half duplex operation.
Setting Duplex Mode
To change the duplex mode to full, type 4 in the Change Work Mode
Menu, and press <Enter>. The messages appear:
This action will change the working mode of Ethernet
Note: the change will NOT be saved after reset.
For changing and saving use the configuration menu
Do you want to proceed (Y/[N])? :
To c on fi rm ty pe y; to discard, type n; and and press <Enter>.
When you proceed, the message appears:
Action has been done.
When you discard the operation, the message appears:
The action has been canceled