24 CHAPTER 2: INSTALLING THE VCN ACCESS CONCENTRATOR
3Connect the Krone connector of the inner wire pair to the new VCN AP
punch-down block, which has been added.
4Connect another punch-down Krone connector from the VCN AP
punch-down block to the back of the patch panel.
5Connect an additional punch-down Krone connector from the patch
panel to the PBX punch-down block to carry voice transmissions of the
inner wire pair to the PBX.
6Repeat step 1 through step 5 for up to 24 telephone lines.
Figure9 shows the resulting infrastructure.