52 MANAGING THE VCN ACCESS CONCENTRATOR
2Connect the LMA port to the PC serial port (COM1 or 2) with the cable
provided.
3Plug the end of the cable with the four-pin MiniDIN connector into one of
the 24 VCN AC LMA ports. For central management or to manage the
first port, plug the MiniDIN into port LMA port 1. To locally manage
another port, plug the MiniDIN into the LMA connector of that port.
Line Card Management
This section describes local management.
All lower level menus are accessed by selecting a menu item from the
menu you are viewing and typing the item number. You return to the
previous menu, the higher level menu, by typing 0 (zero) and pressing
<Enter>.
Local Menus In this section you will find information on how to mo nitor and control an
LC through its LMA port.
In most menus, except where indicated, the option labeled 0 is for
returning to a higher level menu (Figure26).
Figure26 Retur n to Previous Menu Option
Login
After connecting the management terminal to one of the LMA ports 2
through 24, press any key. The login dialog appears:
Login:
Type your Login ID and press <Enter>.
Password:
Type your password and press <Enter>.
The default login is admin; the default password is null—just press
<Enter>.
If you make a mistake in your Login ID, an error message appears:
Login incorrect
0. Return to previous menu