This section provides instructions for installing the following options:
expansion boards
memory upgrade
Tdata storage devices external options.
All options (except external options) require removal of the access cover. Procedures for removing the cover are included in this section.
General Rules
Follow these general rules when installing system options.
Turn off system power and unplug the power cable.
Turn off and disconnect all peripherals.
When handling boards or chips, touch the metal of the system unit to discharge static.
Do not disassemble parts other than those specified in the procedure.
TUse a
Label any removed connectors. Note where the connector goes and in what position it was installed.
Precautions
Take care when working inside the system and when handling computer components. Avoid electric shock or personal injury by observing the following warning.
!WARNING
Before removing the access cover, turn off the power and unplug the system power cable. Power is removed only when the power cable is unplugged.
Static electricity and improper installation procedures can damage computer components. Protect computer components by following the safety instructions in this section.
!CAUTION
Electrostatic discharge can damage computer components. Discharge static electricity by touching a metal object before removing the access cover.
