Removing the Slot Cover
A – Screw | B – Slot Cover |
Save the screw for installing the expansion board. Be sure to save the slot cover for future use.
!CAUTION
A slot cover can damage the system board or any option board if it falls into the system. Take care to keep the slot cover from falling when removing the screw.
If the slot cover does fall into the unit, remove it before replacing the cover.
4.Hold the board by its edges and insert it into the expansion slot.
5.Press the board firmly into the expansion slot connector. Gently rock the board from
6.Insert the screw removed earlier to secure the expansion board to the support bracket (see the following figure).
