How to Start Setup

To start the Setup utility, follow these steps:

1.Turn on or reboot the system.

2.Press F2 after POST begins, but before the system boots up. You have about five seconds to press F2.

Setup’s Main Menu window appears similar to the following screen.

Note: The screen shown is typical of a system. The actual settings on the Main Menu depend upon the hardware installed in the system.

Main Setup Menu

How to Use Setup

The Setup utility has a Main Menu window and six top-level menus with submenus.

The Main Menu window contains the following areas:

A title line the top line of the Main Menu. This line displays the Setup

Tutility name and copyright message.

The menu bar the line under the Setup title line. The menu bar contains six top-level menus to set system parameters.

Utilities 2-3

Page 25
Image 25
NEC SP B-Series manual How to Start Setup, How to Use Setup, Main Setup Menu