15.maintenance instructions

15.1Before performing maintenance, unplug and disconnect battery charger

(see sections 6.7 and 7.6).

15.2After use, unplug charger and use a dry cloth to wipe all battery corrosion and other dirt or oil from terminals, cords, and the charger case.

15.3Have any cracked or frayed cables replaced by an authorized service person.

15.4Servicing does not require opening unit, as there are no user-serviceable parts.

16.storage instructions

16.1Store charger unplugged, in an upright condition. Cord will still conduct electricity until it is unplugged from outlet.

16.2Store inside, in a dry, cool place (unless you’re using an on-board Marine Charger ).

16.3Do not store clips on handle, clipped together, on or around metal, or clipped to cables.

17.troubleshooting

LED GUIDE/PROBLEM

POSSIBLE CAUSE

SOLUTION

The charger is plugged in

No power at the AC

Check for open fuse or

but the POWER ON (red)

receptacle.

circuit breaker supplying

LED is not lit.

 

AC outlet.

 

Poor electrical connection.

Check power cord and

 

 

extension cord for loose

 

 

fitting plug.

 

The battery charger is not

Call customer service

 

functioning properly.

(1-800-621-5485).

The battery is connected

Battery connectors are not

Check for poor connection

and the POWER ON

making a good connec-

at battery. Make sure con-

(red) LED is on, but the

tion.

necting points are clean.

CHARGING (yellow) LED

The battery is bad.

Have the battery checked

is not lit and charger is not

charging.

 

by a qualified service

 

 

person.

 

The battery charger is not

Call customer service

 

functioning properly.

(1-800-621-5485).

 

 

 

10

Page 12
Image 12
Schumacher MSC-2405 owner manual Maintenance instructions, Storage instructions, Troubleshooting