SE-BrotherE_sgml.book Page 30 Monday, June 30, 2003 3:44 PM

GETTING READY ——————————

dThread the thread cassette with the thread from the spool on the extra spool pin.

For more details, refer to "Loading the spool into the thread cassette" (page 24).

eCheck that the thread cassette indicator is lit up in green, and insert the thread cassette (with the extra spool pin attached) into the thread cassette compartment.

Use both hands to press down on both sides of the extra spool pin.

XAt the same time that the thread cassette is inserted, the needle is threaded.

XThe extra spool pin is now installed.

Thread the needle manually (without using the needle threader)

When using special thread, thread with a thickness of 130/20 or thicker, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below.

aRemove the needle.

Refer to "Replacing the needle" (page 37).

When using the wing needle, the twin needle or thread that cannot be used with the needle threader, be sure to remove the needle, otherwise the machine may be damaged.

bCheck that the thread cassette indicator is lit up in green, and then insert the thread cassette into the thread cassette compartment.

For details, refer to a through b (page 27).

XPass the thread through the needle bar thread hooks.

1

aNeedle bar thread hooks

cReplace the needle.

• Refer to "Replacing the needle" (page 37).

dPass the thread through the eye of the needle from front to back.

30

Page 36
Image 36
Brother HE 120 Extra spool pin is now installed, ARemove the needle, Refer to Replacing the needle, CReplace the needle