Brother HE 120 operation manual 100

SE-BrotherE_sgml.book Page 100 Monday, June 30, 2003 3:44 PM

UTILITY STITCHES ———————————————————————————————————————————

	■ Using the quilting guide
CAUTION	Use the quilting guide to sew parallel stitches that
● Be sure to securely tighten the screws	are equally spaced.
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
● Before starting to sew, slowly turn the
balance wheel toward you and check that
the needle does not touch the presser	aInsert the stem of the quilter into the hole at
foot. If the needle hits the presser foot,
the needle may bend or break.		the rear of the walking foot or presser foot
		holder.
eSelect a stitch.	†	Walking foot
• For details, refer to "Selecting stitching" (page
47).
Place one hand on each side of the presser
ffoot, and then evenly guide the fabric while
sewing.
	†	Presser foot holder

	Adjust the stem of the quilter so that the quilt
Note	bguide aligns with the seam that has already
z When sewing with the walking foot, sew at a	been sewn.
speed between slow and medium.
z When quilting, use a 90/14 home sewing
machine needle.

100