Brother HE 120 operation manual Names of Machine Parts and Their Functions, Front view, Cover B

SE-BrotherE_sgml.book Page B Monday, June 30, 2003 3:44 PM

Names of Machine Parts and Their Functions

The names of the various parts of the sewing machine and their functions are described below. Before using the sewing machine, carefully read these descriptions to learn the names of the machine parts.

Front view

1

2

3

4

5

6

7

8

aThread cassette compartment cover

bThread cassette compartment

Insert a thread cassette into the thread cassette compartment.

cThread cassette eject lever

Press this lever to eject the installed thread cassette.

dThread tension dial

Use the thread tension dial to adjust the tension of the upper thread.

eThread cutter

Pass the threads through the thread cutter to cut them.

fArm

Plug in the connector for the embroidery unit.

gEmbroidery unit connector slot

Plug in the connector for the embroidery unit.

hFlap

Use the flap to create a table. When the sewing machine is not being used, store the machine with the flap folded up. Remove the flap to sew cylindrical pieces such as sleeve cuffs.

iSliding leg

Pull out the sliding leg during free-arm sewing.

jOperation buttons

Use the operation buttons to start the sewing machine and raise and lower the needle. (page Cover D)

F

E

D

C

B

A

0

9

kOperation panel

Select a stitch from those that appear in the operation panel. (page Cover E)

lBobbin winder

Use the bobbin winder when winding the bobbin.

mBobbin thread spool pin

Place the spool of thread for the bobbin onto this spool pin in order to wind the bobbin.

nBobbin storage compartment

Store the bobbins designed specifically for this sewing machine in this compartment.

oBobbin winder cover

Open this cover when winding the bobbin.

pThread guide for bobbin winding

Pass the thread around this thread guide when winding the bobbin thread.

Cover B