Model PNR™ | Installation Instructions |
Inspect The Unit Before Installing
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
1.Carefully inspect the PNR for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage.
NOTE: Read all instructions before starting installation.
2.Lay out components to ensure you have all the required parts before proceeding. See “DIMENSIONAL DRAWING” on page 3.
SPECIFICATIONS
Table 1 provides the specificiations for the mount.
Table 1: Mount Specifications
Model | Max Support Weight | Mount |
|
| Extended |
|
| from Wall |
|
|
|
|
|
|
PNR | 200 lbs. (90.72kg) | 25”* |
|
|
|
NOTE: *Dimension does not include the PSB interface bracket.
INTERFACES
Table 2 lists the interface for the PNR.
| Table 2: PNR Interfaces |
|
|
Model | Interface |
|
|
|
|
PNR | 14” x 14” Plasma Static Brackets (PSB) |
|
|
PARTS LIST
Unpack the carton and verify the contents listed in Table
3.If you are missing any of the listed parts, contact Customer Service at:
Table 3: Parts List
REF | DESCRIPTION | QTY |
|
|
|
|
|
|
10 | PNR Wall Mount | 1 |
|
|
|
20 | Cover Plates | 2 |
|
|
|
30 | End Caps | 4 |
|
|
|
40 | Tiewraps | 12 |
|
|
|
50 | Lag Bolts, 3/8” x | 4 |
|
|
|
60 | Flat Washers, 3/8” | 4 |
|
|
|
— | Wrench, Adjustment | 1 |
|
|
|
— | Bar, Adjustment | 1 |
|
|
|
TOOLS REQUIRED FOR INSTALLATION
•Allen wrench set
•Drill and bit set
•Wrench set
NOTE: Other tools may be required depending on the method of installation.
4
