Chief Manufacturing PNR installation instructions Before You Begin

Models: PNR

1 12
Download 12 pages 60.22 Kb
Page 1
Image 1
I N S T A L L A T I O N I N S T R U C T I O N S

I N S T A L L A T I O N I N S T R U C T I O N S

Large Flat Panel Dual Arm Wall Mount Model PNR™

The PNR is wall-mounted, rugged, versatile, and installer-friendly. The PNR is compatible with the

standard (14” x 14”) PSB interface bracket in which a display can be mounted in either the landscape or

portrait position on the PNR.

The dual arms on the PNR:

Extend from the wall 25” in length

Pivot up to 90º left or right of center

The standard PNR is shipped with the support posts for the dual arms centered in the mount. The support posts can be moved laterally right or left of center to readily accommodate sites with limited wall space. The mount also has over an inch of height adjustment. The tilt range for the display is 5º up and 15º down.

The PNR was designed for fast installation. After drawing the plumb line and installing the two top lag bolts into the dual wall studs, the installer hangs the PNR on its top bracket and installs two lag bolts in the bottom bracket. Next, the installer makes the height adjustment, mounts the display, and connects the power/audio/video cables, which are diverted into the built-in path in the swing-out arms. After making the lateral, rotational, and tilt adjustments, the installation process is complete.

BEFORE YOU BEGIN

CAUTION: To prevent damage to the PNR, which could affect or void the Factory warranty, and to the equipment that will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay particular attention to the “Important Warnings and Cautions” on Page 2.

The combined weight of the components installed on the PNR must not exceed 200 lbs. (90.72kg).

The PNR wall mount must be installed on dual wall studs or supporting framework. The wall to which the PNR is anchored must be capable of supporting five times the total weight of the mount and all attached equipment.

If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.

 

 

 

 

 

 

 

 

 

 

 

 

Chief Manufacturing, a division of Milestone AV Technologies

8831-000007 Rev I

 

 

 

 

 

 

 

 

 

 

8401 Eagle Creek Parkway, Savage, MN 55378

©2008 Milestone Technologies

 

 

 

 

 

P: 800.582.6480 / 9 52.894.6280 F: 877.894.6 918 / 952.894.6918

11/08

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1
Image 1
Chief Manufacturing PNR installation instructions Before You Begin, I N S T A L L A T I O N I N S T R U C T I O N S