Installation Instructions | Model PNR™ |
Increase
Figure 18
Removing Display from Mount
1.Remove bolt or padlock from faceplate (if used).
NOTE: The pin may have been used as a more permanent locking device. If so, remove nut and pin and move from the lower holes to the upper holes.
2.Pull back on flag on upper mounting hole and press pin down into "Open" position. (See Figure 19)
WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS! Always use two people and proper lifting techniques when installing or positioning display on mount.
3.Carefully lift display from mount.
4.Lift up on pin and place flag back against faceplate to return it to "Closed" position.
1 | Remove bolt |
|
| or padlock | 2 |
| if used | |
Pin in |
| |
"Closed" |
| |
position - |
| |
move to |
| |
"Open" |
| |
position to |
| |
remove |
| |
display |
| |
| 4 |
|
Pin in |
| |
"Open" |
| |
position - |
| |
move to |
| |
"Closed" |
| |
position |
| |
after display |
| |
is removed. |
|
Figure 19
11