4.Press F14 to copy the selected area.
5.Press the function key required to store the copied data.
6.Press Enter on the numeric keypad to store the copied data in the chosen function key.
Setup Options
The IBM 3270 Display emulation is configured using setup options in the 3270 Display Settings dialog which can be displayed using one of the following three methods:
Using the Session Wizard:
◦In Step 1 set Emulation to IBM 3270 Display then click the Configure button. Using the TeemTalk Window:
◦On the Session menu, select Emulation > IBM 3270 Display then select Configure
Emulation....
◦On the configuration bar, select IBM 3270 Display in the Emulation list box then click Configure Emulation.
The setup options are grouped on five tabs labelled Model, National, Display, Keyboard and Notice Board.
Model Settings
●Model
Factory default:
This specifies what is reported back to the host in response to a terminal identification request. Note that not all features of the specified terminal may be supported.
One of four display sizes can be selected:
Setup Options 151