22 ICL DOC-18 Emulation

This chapter describes the features of the ICL DOC-18 terminal emulation.

Introduction

The DOC-18 mode emulates ICL VT220+ (DOC-18) and is for use with ICL's Office Power application.

The DOC-18 runs the same as the VT300 8-bit emulation, but sets the numeric keypad to application mode by default , the display is set to 25 lines and a special character set is enabled. Also the function of the keys F1 to F4 on the numeric keypad are mapped to the first four function keys along the top of the keyboard, and F5 to F12 perform the same function as the equivalent keys on the VT220 keyboard.

Creating a DOC-18 Emulation Session

You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running.

Using the TeemTalk Session Wizard

This section describes how to use the TeemTalk Session Wizard to create an ICL DOC-18 emulation session.

1.To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard.

2.In the Session Name field, enter a unique name that will identify this session configuration for future selection.

3.Select the Transport method then click the Configure button to specify settings.

4.Select the Connection type then click the Configure button to specify settings.

5.Select Doc 18 in the Emulation list box then click the Configure button to specify settings. (The options are described in the section Setup Options on page 249.)

6.Click Next to display the Advanced Options dialog.

7.Click Next to display the Finalization dialog.

8.If you want a shortcut icon for this session to be created on the desktop, click the checkbox Create icon on desktop for session.

9.Click OK to create the session and exit.

10.To run the session, either double-click on the desktop icon if one was created for the session, or run TeemTalk, display the File menu and select Open Session. Select the name of the required .tts session file then click Open.

Introduction 245