When this option is checked, any trailing spaces will be removed before the line is sent to the printer.
●Wait for printer to close Factory default: Unchecked
This option is only available when either the Print to Serial Device or the Print to LinePrinter Device printer method is selected. When this option is checked, all other processing will be blocked during printing. Please note that the application will be locked during a close if the buffers require flushing.
●Close delay
Factory default: 0 (zero)
Specifies the time (in tenths of a second) to wait before closing. Note that the printer will not be closed if a new open is requested before time out. The application will be blocked during a close if the buffers require flushing. Specifying a large value can avoid blocking.
●Output Character Set Factory default: Iso Latin-1
The character translation used by the printer.
●PC Ansi Codepage
Factory default: PC Multinational (437)
The codepage value when the Output Character Set is set to PC Ansi.
Advanced
The following sections describe the options available in the Advanced tab of the Emulation Printer Settings dialog box. The options available vary depending on the current Printer Method setting in the Settings tab.
Print to File
The following are the options available when the Printer Method option on the Settings tab is set to Print to File.
62 Chapter 10 Printing