●File Name

Factory default: Unspecified

The name of the file to which the print data should be sent.

●Mode

Factory default: Write (destroy existing) The mode in which the file is opened.

◦Write Causes the contents of an existing file to be replaced with new print data.

◦Append Causes print data to be appended to existing file contents.

◦User Defined Mode Enables the User Defined Mode option.●User Defined Mode Factory default: wb+

When Mode is set to User Defined, this settings allows you to specify the mode in which the file is opened.

●Process CR/LF/FF Factory default: Unchecked

Emulation Printer Settings

63