HP TeemTalk Terminal Emulator 8 E-License manual Configuration Selection, Device Control

NOTE: If the XmitFnctn (A) option is selected in the HP70092 Settings dialog (see Setup Options on page 112 for details), the button and F7 key will not deactivate Display Functions mode.

●Auto LF - F8

This button and the F8 key enables or disables Auto Line Feed mode. When enabled, a line feed command is automatically appended to every carriage return command generated from the keyboard. The setting may be saved by selecting Save Session in the File menu.

Configuration Selection

This set of functions is asserted by pressing the F9 key (equivalent to the User System key). This enables you to access three sets of function configurations.

●Device Control - F1

Clicking this button or pressing F1 will cause the Device Control functions to be asserted. The buttons and keys F1 through F8 will function as described in the section Device Control

on page 105.

●Margins/Tabs/Col - F2

Clicking this button or pressing F2 will cause the Margins/Tabs/Col functions to be asserted. The buttons and keys F1 through F8 will function as described in the section Margins, Tabs & Start Column on page 108.

●Modes - F4

Clicking this button or pressing F4 will cause the Mode Selection functions to be asserted. The buttons and keys F1 through F8 will function as described in the section Mode Selection

on page 102.

Device Control

Function Keys & Buttons 105