HP TeemTalk Terminal Emulator 8 E-License manual Auto resize, Dec key mode, Send key state codes

This applies to the DEC VT520 and VT PC-Term emulations. It determines whether keyboard position codes or ASCII codes are sent to the host on key press/release. Note that this cannot be selected at the same time as the Keyboard sends scan codes option.

●	Auto resize
	Factory default: Unchecked
	This applies to the DEC VT520 emulation only. When this option is checked, the window size will
	automatically be adjusted each time the buffer size is changed either by the host or through setup.
	The following table indicates the window size (lines per screen) that is used for the specified
	number of lines per page.
	Lines per Page:	24	25	36	42	43	48	52	72
	Lines per Screen:	26	26	43	43	43	52	52	52
●	Dec key mode
	Factory default: Unchecked
	The keyboard can be used in one of two modes, Normal (default) or DEC. This option allows you
	to change its default mode. You can toggle between the two modes by pressing the keys Alt +
	Num Lock together. The 10th item on the status bar will display DEC when the keyboard is in
	DEC mode. The field will be blank when in normal mode.
● Send key state codes
	Factory default: Unchecked
	When this option is checked, escape sequences for modifier key presses will be sent to the host.
●	Application keypad
	Factory default: Unchecked
	The setting of this option determines the effect of pressing keys in the keypad on the right side of
	the keyboard.
	When unchecked, the keypad is in numeric mode and keys will generate the characters shown on
	the key caps. When checked, the keypad is in application mode and keys will generate control
	functions when pressed. The top row of four keys act as the equivalent DEC function keys PF1
	through PF4.
●	Application cursor keys
	Factory default: Unchecked
	When this option is checked the cursor keys will generate application program codes when
	pressed. unchecked, the keys will generate normal cursor movement commands.
●	Jump scroll
	Factory default: Checked

The setting of this option determines whether data is scrolled one or several lines at a time when the window becomes full.

When checked, data will scroll up several lines at a time as determined by the Scroll rate setting below.

94 Chapter 12 VT Series Emulation