HP TeemTalk Terminal Emulator 8 E-License Answerback mode Factory default Unchecked, Send ACK

Factory default: Checked

When this option is checked, TeemTalk will recognize an additional set of Wyse codes which are not normally supported by specific non-Wyse terminals.

●Answerback

Factory default: Unspecified

This enables you to specify the Answerback string that is sent to the host in response to an ANSI mode enquiry command. The string may be up to 30 characters long.

●Answerback concealed Factory default: Unchecked

Checking this option will cause the Answerback string specified in the text box above to be locked from change and displayed as asterisks. Note that unchecking this option will cause the Answerback string to be deleted.

●Answerback mode Factory default: Unchecked

This option applies to all emulations and specifies whether or not an answerback message is automatically sent to the host in response to an ASCII ENQ character.

●Send ACK

Factory default: Checked

This option applies to all emulations and specifies whether or not an ASCII ACK character is sent to the host port after certain commands have been executed.

●Colour support

Factory default: Unchecked

When this option is checked, an additional set of host commands will be recognized to determine the colors used for the display. Wyse 350 color commands will be recognized in all modes except Wyse 60, which will use Wyse 60 color commands.

●Application key mode Factory default: Unchecked

When application key mode is selected, the function keys and certain editing keys will send application codes when pressed, regardless of whether or not the keys have been redefined. When this option is not selected, the keys will send their programmed definitions.

●CR = CR/NULL Factory default: Checked

This option allows you to disable the NULL being automatically sent on CR.

●Block mode

Factory default: Unchecked

Setup Options 231