Preferences

●Turnaround char Factory default: CR

This option specifies the line turnaround character (LTC) that is generated when a Read command is received or one of the block data transmission keys is pressed. Note that selecting DC3 will disable the XON/XOFF inbound and outbound pacing characters.

●Forcing insert Factory default: Both

This option specifies how an insert command affects displayed data when the screen is full.

◦Off - you cannot perform an insert operation.

◦Line - you will be able to insert one or more lines, using the Ins Ln key for example. The contents of the current and all following lines will move down the number of lines inserted, causing the lines originally at the bottom of the display to be discarded.

◦Character - you will be able to insert one or more characters in the current line. Characters to the right of the cursor position will move along. If the Auto Wrap option is set to No, then characters originally at the end of the current line will be discarded. If set to Yes,

Setup Options 135