The options on this tab specify Environment Variables and values passed as part of the Telnet 5250E protocol.
Note the following rules for entering values:
●A value of "," deletes the variable.
●A value of CURRENTVALUE,NAME=VALUE adds a new variable NAME with value VALUE.
●Use ",," to enter a ",".
●Use "==" to enter a "=".
●Values started [! are not reported (this is the default do not report string which can be changed). The following is a list of the Environment Variables and explanations of their values:
●USER
Specifies the user or account name to use to log on to the remote system.
●JOB
Specifies the job ID to use when logging into the remote system.
●ACCT
Specifies the account ID to use when logging into the remote system.
●PRINTER
Specifies the default location for printer output.
●SYSTEMTYPE
Specifies the type of operating system used by the system sending this variable.
●DISPLAY
Specifies the X display location of the client.
●DEVNAME
Specifies the name of the printer device.
●IBMIGCFEATThis is always set to Don't Report.
●IBMMSGQNAMESpecifies the name of the message queue to which operational messages for the printer are to be sent.
●IBMMSGQLIBSpecifies the message queue library.
●IBMFONT Factory default: 10Specifies the font identifier and point size used by the
Setup Options 201