●Auto wrap

Factory default: Checked

The setting of this option determines whether characters wrap to the next line when the right margin is reached. When unchecked, on reaching the right margin, the last character position will be overwritten by every new character received.

●Auto line feed

Factory default: Unchecked

When checked, a line feed command will be appended to every received carriage return command.

●80/132 clears

Factory default: Unchecked

This option applies to the WY-50+ and WY-60 emulations and determines whether or not data is cleared from the display when the number of columns is changed. The screen is always cleared when the number of columns is changed in the other emulations.

●Economy 80

Factory default: Unchecked

This option applies to the WY-50+ and WY-60 emulations and enables 80 column display with more lines of display memory.

●WRPT dim

Factory default: Checked

This option applies to all emulations and enables you to specify the appearance of write-protected characters on the display. Checking this option will cause the characters to be dimmed.

●WRPT invisible

Factory default: Unchecked

This option applies to all emulations and enables you to specify the appearance of write-protected characters on the display. Checking this option will cause the characters to be invisible. Note that the WY-50+ and WY-60 emulations also support the invisible attribute.

●WRPT reverse

Factory default: Unchecked

This option applies to all emulations and enables you to specify the appearance of write-protected characters on the display. Checking this option will cause the characters to be displayed in reverse video.

●WRPT underline Factory default: Unchecked

This option applies to all emulations and enables you to specify the appearance of write-protected characters on the display. Checking this option will cause the characters to be underlined. Note that the WY-50+ and WY-60 emulations also support the underline attribute.

228 Chapter 20 Wyse Emulations