HP TeemTalk Terminal Emulator 8 E-License manual Creating a VT Series Emulation Session

●VT510 7-Bit and VT510 8-Bit

These emulations enable you to run applications written for the DEC VT320 terminal, the difference is in their treatment of 8-bit control codes. When VT510 7-Bit is selected, all 8-bit codes are converted to their 7-bit equivalents, whereas VT510 8- Bit leaves 8-bit codes unchanged. If you are using VT200 applications, select VT510 7-Bit.

●VT-UTF8

This emulation is an enhanced version of the VT100 emulation that supports non-English and drawing characters. It supports localization of the single-byte and double-byte character sets and all other languages supported by Windows. Additional functionality, such as colours, is also provided.

Creating a VT Series Emulation Session

You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running.

Using the TeemTalk Session Wizard

This section describes how to use the TeemTalk Session Wizard to create an VT Series emulation session.

1.To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard.

2.In the Session Name field, enter a unique name that will identify this session configuration for future selection.

3.Select the Transport method then click the Configure button to specify settings.

4.Select the Connection type then click the Configure button to specify settings.

5.Select VT Series in the Emulation list box then click the Configure button to specify settings. (The options are described in the section Setup Options on page 84.)

6.Click Next to display the Advanced Options dialog.

7.Click Next to display the Finalization dialog.

8.If you want a shortcut icon for this session to be created on the desktop, click the checkbox Create icon on desktop for session.

9.Click OK to create the session and exit.

10.To run the session, either double-click on the desktop icon if one was created for the session, or run TeemTalk, display the File menu and select Open Session. Select the name of the required .tts session file then click Open.

76 Chapter 12 VT Series Emulation