Philips TS3259C1 manual Using the AUDIO/VIDEO Input Jacks CONT’D, Connect the S-VIDEO

USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)

S-VIDEO INPUT

The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity for the playback of S-VHS VCR tapes or Digital Video Discs than the normal antenna picture connections.

Note: The VCR (or Digital Video Disc player) must have a S- VIDEO OUT(put) jack in order for you to complete the connec-

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel, to the last viewed channel, then the AV 1 connection, then the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel, to the last viewed channel, then the MM 1 (AV 1) con- nection, then the MM 2 (AV 2) con- nection.

When using the S-Video input jack remember that it will take prece- dence over any video signal coming from the Video IN-1 jack. The sig- nal from the S-Video jack can only be viewed on the AV 1 channel.

BACK OF TV

1

tions shown on this page.

BEGIN

Connect the S-VIDEO

CABLE to the S-VIDEO input jack on the rear of the television, then connect the AUDIO (red and white) cables to the AUDIO IN (IN 1) jacks on the rear of the TV.

Connect the S-VIDEO

CABLE to the S-VIDEO output jack on the accessory device. Then, connect the red and white AUDIO CABLES to the AUDIO

	S-VIDEO CABLE	S-VIDEO
24	(NOT SUPPLIED)	VIDEO
		L
	ANT "A"	AUDIO
	75	R/MONO
AV 1			IN-1	OUT
			AUDIO IN
			(RED/WHITE)
AV 2	VIDEO IN			2
	(YELLOW)
	ANT/CABLE	S-VIDEO	R	L
		OUT	AUDIO OUT
	OUT

BACK OF ACCESSORY

(left and right) output jacks on the rear of the accessory device.

Turn the VCR (or Digital

Video Disc Player) ON.

Press the AV button on the remote until you tune to the AV 1 channel. You are now ready to view the tape or disc on the TV.

4				3
	SLEEP			POWER
TV	AV	STATUS/EXIT	CC	TV/VCR-CLOCK
VCR	VCR	INCREDIBLE	MULTI	A/CH
ACC	RECORD	STEREO	MEDIA

SMARTSMART

SOUNDPICTURE

MENUSURF

DBS, DVD, Video Game, etc.

(EQUIPPED WITH S-VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

NON-STEREO DEVICE,

USE ONLY THE AUDIO

R/MONO JACK.

SMART HELP

The S-VIDEO and IN-1 inputs are in parallel. The S- VIDEO input will take precedence when in use. If separate video sig- nals are connected to the S-Video and VIDEO IN-1 inputs, the signal

from the VIDEO IN-1 input will not be useable.

If you have added AV 1 to the TV’s channel memory, just press the CHANNEL + or – buttons until the AV 1 mode (channel) is selected.

VOL CH

MUTE

32